...
Using screen and touchpad double-click and run “Shutdown.bat” file via icon on the desktop.
Wait till IPC shuts down and all LEDs on IPC and Bus Coupler terminals turn off.
Turn off the circuit breakers -25010CB and -69810CB. These cutoff cut off the 24VDC to the MMCU and CMCU modules.
Finally, pull the front panel power connector (-35109PL1 or 77609PL1). Removing connector ensures that the ground connection is severed from the outside preventing restart via PC_ON pin. The LED on the front panel should turn off after this step.
To restore power run the above sequence in reverse.
...