Enclosure GP Pro Pendant HMI
ProFace editor software (Enclosure HMI)
ProFace HMI editor software (EMCS Pendant HMI)ProFace Touchscreen HMI is located on the Telescope level, near the rear door.
Editor software for Enclosure HMI is GP-ProEX_V408.000_PFA.exe in this folder
Serial Number and keycode are required to enable the ProFace editor after installation
Proface HMI serial number | 10358426016 |
ProFace keycode | 7742-0817-2082 |
Procedure to download application to display
...
Controlled backup copy
Controlled copy of the EMCS application (EMCS_HMI_Pendant.prx) is stored at Bitbucket (https://bitbucket.org/DKIST/EMCS.git ).
Local repository is available on your computer when git is installed.
Local copy
History of earlier revisions of the application are stored here: https://www.dropbox.com/sh/vkjtd9slw1qjeqi/AABRB0phmSXBPZN7rIZ4cKvYa?dl=0
Transfer application to display
Prepare a USB drive.
Save the application in GP-Pro
Create a backup file of the application on a USB Drive
Transfer the project on the USB drive to the Display
...
Prepare a USB drive.
Get a USB drive that can be erased.
Project size is less than 1MB.
Delete all files on the USB drive
Save the application in GP-Pro
Click Project > SaveAs. Save to an appropriate filename.
...
Create a backup file of the application on a USB Drive
Click Project > Transfer Project > Transfer Settings
...
On Transfer Settings screen click ‘OK’.
Then on Transfer Tool screen click 'Memory Loader
...
On Memory Loader screen click ‘Create Backup File’
...
On Select Folder screen click ‘USB’, then click ‘OK’
...
On Browse for Folder screen click the USB drive that you prepared for the download. Then click ‘OK’
...
Application will be transferred to the USB drive.
When Data creation complete is displayed, click 'OK” to close the screen.
...
Remove the USB drive from your computer.
Transfer the project on the USB drive to the Display
Follow this Procedure to download application to display