Versions Compared

Old Version 3

changes.mady.by.user Tim Williams

Saved on

compared with

New Version Current

changes.mady.by.user Karl Newman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note

Adjusting the offset should only be attempted by trained and authorized personnel.

Connecting to a VM

From one of the HLS Workstations or from a Windows computer using Remote Desktop Connection that has an authorized connection into the Control network.:

  1. Click Applications->Utilities->Remote Desktop Viewer (or from the command line run vinagre)

  2. Click Connect

  3. Select RDP Protocol

  4. Enter hostname or IP Address (MMCS: 10.3.1.12, CMCS: 10.3.1.13)

  5. Set resolution: Width: 1600, Height: 1200

  6. Enter username: atst-devel

  7. Click Connect

  8. When prompted, enter password (hint: password was set before the system was sent to Hawaii)

  9. Disconnect when finished

...

Info

A second person opening a Remote Desktop session to the same Windows machine will cause the first session to terminate.

Adjusting offset

  1. On the engineering interface in the MMCS Virtual Machine (10.3.1.12 by RDP).

  2. Configuration screen,

  3. Time tab.

  4. Offset can be adjust by setting absolute offset or applying a relative offset.