Page Comparison

...

From one of the HLS Workstations or from a Windows computer using Remote Desktop Connection that has an authorized connection into the Control network.:

1. Click Applications->Utilities->Remote Desktop Viewer (or from the command line run vinagre)

2. Click Connect

3. Select RDP Protocol

4. Enter hostname or IP Address (MMCS: 10.3.1.12, CMCS: 10.3.1.13)

5. Set resolution: Width: 1600, Height: 1200

6. Enter username: atst-devel

7. Click Connect

8. When prompted, enter password (hint: password was set before the system was sent to Hawaii)

9. Disconnect when finished

...