Skip to end of banner
Go to start of banner

Data Center Archive User Tools Are Not Functioning

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Summary

The following article should be used when you have issues with the DKIST User Tools. If you’re looking for help regarding Data Center Archive Portal not functioning, please go here.

Reasons, Solutions and Instructions

There could be a number of reasons why the DC User Tools are not functioning. Please read through the list of possible reasons why you cannot find the data you’re looking for and assist the Help Desk in narrowing down the issue (by following the solution instructions below (in green)).

User’s computer is not connected to the internet

In order to search or download data using DC User Tools, user must have internet connectivity to the DKIST Data Center to function.

Solution:

  • The DKIST Data Portal for searching and retrieving data is located at <http://dkist.data.nso.edu/>. There will be scheduled downtimes for the DC Portal for maintenance. During those times, a banner should be visible to the user noting the downtime. If the user receives an error stating that the search service is down and to try back later, please try again in a few minutes (to an hour).

    Ensure your internet connection is working fine. If link still does not work, in a separate tab, enter the search URL into http://www.isitdownrightnow.com. This should tell you if the downtime is expected.

    Please provide the following information to assist he Help Desk is tracking down the issue:

    1. Browser and version that you are using,

    2. Error message (screen shot)

Data requested (expected) is not available yet due to one of the following:

  • it is not processed yet by the Data Center

  • it is not available yet (sill being quality inspected during the Operations Commissioning Phase (OCP) only)

  • the Experiment hasn’t been run yet and therefore no data has been processed nor made available

  • the Experiment has been run, but the associated calibration data is not complete yet for pipeline processing

Solution:

  1. If you are the PI, you will get a notification when the data from your program(s) are processed, calibration and made available in the Data Center. Note that notifications regarding the status change of observing programs themselves being taken is not an indication that your data will be made available shortly thereafter; it can take weeks to complete the entire set of calibrations and data processing before the Data Center can release the Level 1 files.

  2. You will need to wait for these data to become available; please be patient.

  3. If none of the above matches your parameters, go to the next possibility.

Can’t request data for download even though it is available due to the following:

  1. The data you have selected are still under the proprietary period and cannot be downloaded; you will need to wait until this period ends and the data become public.

Solution:

2. The data you have selected are available, but there’s a problem.

Solution:

  • Please submit a Help Desk ticket

    1. Please provide details on what data you are looking for (i.e. Proposal ID, Experiment Completion Status Notification, DC Data Availability Notification, any other details to pin down the request)

There could be a user error with the search parameters sent to the Data Center:

  1. Problems with search parameters:

    1. user may not be searching correctly for data they want

    2. the search parameters may be too narrow, therefore excluding desired data

Solution:

  1. Double check the search parameters and ranges (See: How to on Search)

  2. Try to simplify your search

  3. Make sure you page through results if they are all not displayed on one page

  4. If you truly believe that your search is Ok, then please submit a Help Desk ticket with your search parameters

    1. Please provide details on what data you are looking for (i.e. Proposal ID, Experiment Completion Status Notification, DC Data Availability Notification, any other details to pin down the request)

See Data Center Archive data search results don't return my data for proposal X.

2. Correct data are being returned, but the number of results has been limited to 1000.

Solution:

  1. Be more specific in your search, for example use a smaller time range or add an extra filter.

All my plots are blank

  1. Downloading of the metadata (the asdf file) and the arrays (FITS files) are two separate steps.

Solution:

  • After the asdf file is loaded into a Dataset object call the Dataset.download() method to start transferring the FITS files with Globus.

  • If you cannot resolve the issue yourself, please submit a Help Desk ticket.

I can’t transfer FITS files with Globus

See: My Globus download had an error - can you please help?

There could be a problem or bug in the DC, such as:

  1. a software issue

    1. The Application Program Interface (API) is not behaving correctly

    2. Call to the API could be malformed/inadequate

  2. data loss/corruption in the DC inventory record in the database

Solution:

  • Please submit a Help Desk ticket

  • Please let the Help Desk know why you expect data to be there:

    1. did you receive email notification(s), but these data are not available

    2. were these data there before, but they are no longer there

There could be a problem or bug in the User Tools, such as:

  1. Software issue

    1. Software is not behaving correctly

    2. User Tools requests to the API could be malformed/inadequate

Solution:

Please review the options listed on this page in order to narrow down the reasons why the issue is occurring as well as to try some of the solutions. If you cannot resolve the issue yourself, please submit a Help Desk ticket.

Filter by label

There are no items with the selected labels at this time.

  • No labels