Indication
Condition
The Azimuth Safety Encoders are used in the Ephemeris Safety Function, these indicators show:
If the Safety Encoder is not OK.
If the Safety Encoder is not properly homed.
Operator Procedure
Do not open the M1 Cover, if the aperture cover is open.
If both the M1 Cover and Aperture Cover are open at the same time, the telescope must be ‘on-sun’ or the light path safety function will activate forcing both covers to close.
Technician Procedure
Ensure telescope safety encoders are communicating properly.
Ensure telescope safety encoders have been properly homed. Follow this procedure.
The telescope safety encoders have to be re-homed after any loss of power or loss of communications.
Engineering Procedure
Disable Telescope Ephemeris safety function
Complete Job Hazard Analysis prior to disabling Telescope Ephemeris safety function.
If necessary, disable Telescope Ephemeris safety function.
press:
indicator should change to:
