Skip to end of banner
Go to start of banner

PLC Duty Engineer Qualification

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Demonstrate an understanding of these topics

Software / PLC / Controllers

Rockwell,

  • Software: RSLogix 5000, Studio 5000

  • Controller ControlLogix, GuardLogix

  • I/O: Modules, Adapters, Wiring

  • Reference Documents

BeckHoff, TwinCat

Siemens S120 Drives, Starter

CodeSys

Click PLC

Kubler configuration application

Application software backup & archive

Siemens S120 Drives

Starter software

Control Unit, Cliq, ProfiNet, Infeed, Drive, Brake Module, Encoder

Vector mode, Servo mode

Configuration, DCC

Communication architecture: ProfiNet, EtherNetIP, PLC Interface

Motion faults, safety faults

Load sharing with multiple drives

EMCS

PLC program

PLC IO & Communication

EMCS / LIC interface

ECS interface

Altitude, Azimuth, Aperture cover, Rear Door, Platform drives

Altitude, Azimuth, Cable Wrap Encoders

Azimuth, Cable Wrap Hardstops

Sensors

Position Encoders

Cabinet locations

Cabinet schematics

Ignition HMI

Pendant HMI

HMI fault analysis & troubleshooting

Typical faults & recovery

GIS

PLC network architecture

Local Interface Controllers: Coude, Mount, Telescope, Optical Subsystem (OSS), Instruments

PLC programs

PLC IO & Communication

GISS interface

Light path, M1 cover

Cabinet locations

Cabinet schematics

HMI fault analysis & troubleshooting

Typical faults & recovery

Mount

Altitude, Azimuth, Cable Wrap Encoders

Azimuth, Cable Wrap Hardstops

Cabinet locations

Cabinet schematics

HMI

Typical faults & recovery

HMI fault analysis & troubleshooting

Electrical Distribution

Electrical Distribution single line

Backup power

Cabinet locations

  • No labels